Controlling The Display; Adjusting The Primary Reading For Four-Digit Lcd Readout; Auxiliary Reading - Siemens HydroRanger 200 Instruction Manual

Controlling the Display

RUN mode provides numerous parameters and variables that you can track on the
Display
display (see
The LCD displays EEEE if a value is too long.

Adjusting the primary reading for four-digit LCD readout:

Parameter
P060 Decimal Position
P061 Convert Reading
P062 Offset Reading
Example
To reference the displayed level to sea level, enter the distance in Units (P005), between
Empty (P006) and sea level. (Enter a negative value if Empty is below sea level.)
Sea Level
P062 is the distance between sea level and Empty.

Auxiliary Reading

The Auxiliary Reading area of the LCD displays parameter values while leaving the
primary reading on screen.
The parameters shown in the auxiliary reading field are indexed as follows:
Note:
• global
• by transducer
• by level
Page 24
on page 21).
Action
Sets maximum number of decimals
Scales the reading to fit
Shifts the reading up or down by a fixed amount
P006
P007
P062
HydroRanger 200 – INSTRUCTION MANUAL
Reservoir
7ML19985FC03