Siemens HydroRanger 200 Instruction Manual page 171

To display a record
Press key to enter display auxiliary mode and then:
• Press TRANSDUCER
on Dolphin Plus
To delete a record
Press CLEAR
address. The value returns to - - - -.
P331 Auto Record Enable
Use to enable/disable the Auto Profile Record function.
Primary Index
Values
P332 Auto Record Transducer
Specifies the Transducer Point Number for which Auto Profile Records are saved.
Please note that Differential and Average operation is a feature of the HydroRanger 200
6 relay model.
Primary Index
Values
Altered By
HydroRanger 200 [6 relay model]
This feature is preset to Point Number 1. (Alteration is only required if differential or
average Operation [P001 = 4 or 5] is selected.)
7ML19985FC03
to copy the current echo profile into the buffer for display
and then ENTER
Global
Range: 0 to 1
0 * Off
1 On
Global
Range: 0 to 2
0 Any transducer
1 * Transducer One
2 Transducer Two
• P001 Operation = 4 or 5
HydroRanger 200 – INSTRUCTION MANUAL
to delete the echo profile record in the selected
Page 161