Modbus Register Map - Siemens HydroRanger 200 Instruction Manual

Modbus Register Map

Features affecting
HydroRanger 200 6 relay model. They are clearly marked.
The memory map of the HydroRanger 200 occupies the Modbus holding registers
(R40,001 and up). This map is used when the protocol is Modbus RTU slave or Modbus
ASCII slave.
Register Map for Most Common Data
Legend
Type The type of data held in the group of registers.
Start The first register to hold the referenced data.
Data Type The possible values of the data in the register. See
105 for more information.
Description The type of data held in the individual registers.
#R The number of registers used for the referenced data.
Read/Write Indicates whether the register is readable, writeable or both.
Type Description
Word Order
Register Map Type
Map ID
Siemens Milltronics
ID
Product Code
Single Parameter Access (SPA)
Reading (3)
Point
Data
Volume (2)
model]
1.
Maximum registers shown; fewer may be used depending on options installed.
2.
Varies according to model.
1OR 3 relay model: Available as reading 1 and reading 2 when in either Single or Dual
Point Mode. In Dual Point Mode, reading 1 and reading 2 are always available.
6 relay model: Available as reading 1, reading 2, and Average or Difference when in
either Single or Dual Point Mode. In Single Point Mode, point 2 and 3 are only avail-
able if P001 = Average or Difference. In Dual Point Mode, reading 1 and reading 2 are
always available. Point 3 is only available if P001[3]= Average or Difference.
3. nd
2 volume available in Dual Point Mode only.
7ML19985FC03
volume mA input
, , and
Start
40,062
40,063
40,064
R40,090
41,010
2
41,020
3
[6 relay
HydroRanger 200 – INSTRUCTION MANUAL
Average or Difference
1
Data Type
#R
0/1
1 0/1 = P782
1 4 = Model 200
6 = Model 100
Appendix A
7 see
2 -20,000 to 20,000
2 -20,000 to 20,000
readings apply to the
Data Types
on page
Read/
Write
R/W
R/W
R
on page 112
R
R
Page 95