Example:
68/93
Building Technologies Division
Infrastructure & Cities Sector
11 Modbus interface
The tables that follow in this chapter specify the addresses of the readable and writable
words that the customer is able to access. The customer may read and/or write the
values using SCADA programs, PLCs, or similar.
The entries under Access have the following meanings:
Read Only, value can only be read
R/O
Read/Write, value can be read and written
R/W
The number of characters specified under Data type in the case of character strings
includes the final \0.
Char10 means that the text is up to 9 characters long. The final \0 character is then
added to this.
11.1 User level
Address
Access
Data type
0x0000
R/O
Float
0x0002
R/O
Float
0x0004
R/O
Float
0x0006
R/O
Float
0x0008
R/W
Float
0x000A
R/W
Float
0x1035
R/O
Float
0x1043
R/O
Float
0x1058
R/O
Word
User Manual RWF55...
11 Modbus interface
Signal reference
Parameter
Analog input InP1
X1
Analog input InP2
X2
Analog input InP3
X3
WR
Actual setpoint
Setpoint 1
SP1
SP2 (= dSP)
Setpoint 2
Analog input InP3
---
(unfiltered)
---
Actual angular
positioning
B1
Burner alarm
CC1U7867en
05.11.2013