AMT Datasouth Fastmark M6 PLUS Series User Manual page 57

C. Cont. Mode
Calibration
Bline Mode
> Cont. Mode
Exit
Press the
button to enter the black-mark sensor calibration mode.
C-1 Automatic
When enter the [Automatic] option, you will see following message and printer will
calibrate the sensor sensitivity automatically. When calibration process is completed,
the LCD screen will return to the previous menu.
Cont. Mode
Automatic
C-2 Manual
In case "Automatic" sensor calibration cannot apply to the media, please use "Manual"
function to calibrate the sensor manually.
Cont. Mode
>
When enter [Manual] option, you will see following message. Please complete there
steps：
Cont. Mode
Remove Label
Intensity
Ref. Level
3/4
Cont. Mode
>
and buttons to scroll the cursor to the sensor type. Press the
2/3
Automatic
Manual
Exit
xxx
1/3
Automatic
Manual
Exit
1. Remove the continuous label. Press
the
into the printer.
x
51
button to set the value