When enter [Manual] option, you will see following message. Please complete those
steps:
Gap Mode
Scan Backing
Intensity
Ref. Level
Gap Mode
Scan Paper
Intensity
Ref. Level
Gap Mode
Complete
Intensity
Ref. Level
Paper Len.
00812 dot
Gap Size
0024 dot
x
xxx
x
xxx
x
xxx
1. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the paper length into the
printer.
2. Press the
the cursor from left digit to right digit,
and press the
the value from "0" to "9" and the "dot/
mm/ inch". Press the
button to set the gap size into the
printer.
3. Open the print head mechanism, put
the label backing (liner) under the
media sensor. Press the
button to set the value into the printer.
Media sensor location
Label backing
(liner)
4. Then, Put the label with liner under the
media sensor. Press the
button to set the value into the printer.
Media sensor location
Label with liner
5. The gap sensor calibration is
complete. Press the
button the LCD screen will return to
the previous menu.
45
button to move
button to set
button to move
button to set