AMT Datasouth Fastmark M6 PLUS Series User Manual page 46

3.1.1-2.12 Delimiter Char:
Print Setup
Control Prefix
Format Prefix
> Delimiter Char
This option is used to set delimiter character. Press the
from left digit to right digit, and press the
"F". Press the
the setting and return to the previous menu.
3.1.1-2.13 Media Power Up:
Print Setup
Format Prefix
Delimiter Char
> Media Power Up
This option is used to set the action of the media when you turn on the printer. Printer default
setting is No Motion. When enter this list, the print mode in the right side of " >" icon is the
printer current setting. Press
press
return to the previous menu.
Selections
Feed
Calibration
Length
No Motion
12/17
Delimiter Char
button to set the value into printer. Press
13/17
Media Power U
Length
> No Motion
Exit
button to enable the setting. Press
Printer will advance one label
Printer will calibration the sensor levels, determine length and
feed label
Printer determine length and feed label
Printer will not move media
< , > 2CH
button to set the value from "0" to "9" or "A" to
4/5
and to select the different print mode and
Description
40
button to move the cursor
key to cancel
key to cancel the setting and