B. Bline Mode
Calibration
Gap Mode
>
Bline Mode
Cont. Mode
Press the
button to enter the black-mark sensor calibration mode.
B-1 Automatic
When enter the [Automatic] option, you will see following message and printer will feed
the black mark label to calibrate the sensor sensitivity automatically. When calibration
process is completed, the LCD screen will return to the previous menu.
Bline Mode
Automatic
B-2 Manual
In case "Automatic" sensor calibration cannot apply to the media, please use "Manual"
function to calibrate the bline sensor manually.
Bline Mode
>
When enter [Manual] option, you will see following message. Please complete there
steps:
2/4
Bline Mode
>
and
buttons to scroll the cursor to the sensor type. Press the
2/4
Automatic
Manual
Pre-Printed
Paper Len.
00151 dot
1/4
Automatic
Manual
Pre-Printed
1. Press the
cursor from left digit to right digit, and press
the
button to set the value from "0" to
"9" and the "dot/ mm/ inch". Press the
button to set the paper length into
the printer.
48
button to move the
Need help?
Do you have a question about the Fastmark M6 PLUS Series and is the answer not in the manual?