AMT Datasouth Fastmark M6 PLUS Series User Manual page 36

The direction setting value is either 1 or 0. Use this option to setup the printout direction. Printer
default printout direction is DIRECTION 0.
Press
enable the setting. Press
menu.
The following 2 figures are the printouts of DIRECTION 0 and 1 for your reference.
DIRECTION 0
Note: If printing from enclosed software/driver, the software/driver will send out the
DIRECTION 0 command, which will overwrite the setting set from the front panel.
3.1.1-1.4 Print Mode: (None/Batch Mode/Peeler Mode/Cutter Mode/Cutter Batch)
Print Setup
Density
Direction
> Print Mode
This option is used to set the print mode. Printer default setting is Batch Mode. When enter this
list, the print mode in the right side of " >" icon is the printer current setting. Press
to select the different print mode and press
Press
Printer Mode
None
key to set the direction as 1, and
4/12
Print Mode
> Batch Mode
Peeler Mode
Cutter Mode
key to cancel the setting and return to the previous menu.
Next label top of form is aligned to the print head burn line
location. (Tear Off Mode)
key to cancel the setting and return to the previous
DIRECTION 1
2/6
Description
30
to set it as 0, and
button to enable the setting.
key to
and