AMT Datasouth Fastmark M6 PLUS Series User Manual page 47

3.1.1-2.14 Head Close:
Print Setup
Delimiter Char
Media Power Up
> Head Close
This option is used to set the action of the media when you close the printhead. Printer default
setting is No Motion. When enter this list, the print mode in the right side of " >" icon is the
printer current setting. Press
press
return to the previous menu.
Selections
Feed
Calibration
Length
No Motion
3.1.1-2.15 Label Top:
Print Setup
Media Power Up
Head Close
> Label Top
This option is used to adjust print position vertically on the label. Press the
move the cursor from left digit to right digit, and press the
"+" to "-" or "0" to "1/2". Press the
+000 and range is -120 to +120 dots.
14/17
Head Close
>
button to enable the setting. Press
Printer will advance one label
Printer will calibration the sensor levels, determine length and
feed label
Printer determine length and feed label
Printer will not move media
15/17
key to cancel the setting and return to the previous menu. The default value is
4/5
Length
No Motion
Exit
and to select the different print mode and
Description
Label Top
+000
button to set the value into printer. Press
41
key to cancel the setting and
button to set the value from
button to