AMT Datasouth Fastmark M6 PLUS Series User Manual page 50

A. Gap Mode
Calibration
> Gap Mode
Bline Mode
Cont. Mode
Press the
button to enter the sensor calibration mode.
Note: If printing from enclosed software/driver, the software/driver will send out the
GAP or BLINE command, which will overwrite the sensor type setting set from the
front panel.
A-1 Automatic
When enter the [Automatic] option, you will see following message, and printer will feed
2 to 3 gap labels to calibrate the sensor sensitivity automatically. When calibration is
completed, the LCD screen will return to the previous menu.
Gap Mode
Automatic
A-2 Manual
In case "Automatic" sensor calibration cannot apply to the media, please use "Manual"
function to calibrate the gap sensor manually.
Gap Mode
>
1/4
Gap Mode
>
and buttons to scroll the cursor to the media type and press the
2/4
Automatic
Manual
Pre-Printed
1/4
Automatic
Manual
Pre-Printed
44