AMT Datasouth Fastmark M6 PLUS Series User Manual page 38

Note: If printing from enclosed software/driver, the "Use current printer settings" option
is enabled, software/driver will not send out the SHIFT command to overwrite the
settings set from the front panel.
3.1.1-1.7 Reference X & Reference Y:
Print Setup
Shift Y
Reference X
> Reference Y
This option is used to set the origin of printer coordinate system horizontally and vertically.
Press the
button to set the value from "0" to "9". Press the
printer. Press
default value is 000.
Note: If printing from enclosed software/driver, the software/driver will send out the
REFERENCE command, which will overwrite the setting set from the front panel.
3.1.1-1.8 Code Page:
Print Setup
Reference X
Reference Y
> Code Page
Use this option to set the code page of international character set. For more information about
code page, please to refer the programming manual.
When enter the code page list, the code page in the right side of ">" icon is the printer current
setting.
Press the
enable the setting. Press
menu.
Note: If printing from enclosed software/driver, the software/driver will send out the
command, which will overwrite the setting set from the front panel.
code page name
9/12
Reference Y
button to move the cursor from left digit to right digit, and press the
key to cancel the setting and return to the previous menu. The
Code Page
10/12
> 850
852
860
and to select the code page, and press the
key to cancel the setting and return to the previous
7-bit
International
000
11/41
code page number
32
button to set the value into
8-bit
International
Character Set
button to