Spectra Lighting - Response SL3 Installation And Operating Manual

the Detector is in Test Mode with the battery
cover removed).
The indicator on the Control Panel can be
cancelled by pressing
flashing on receipt of the next low battery signal.
SPECTRA PLUS LIGHTING
If the Control Panel is liked to a Spectra plus
Lighting Receiver and the Spectra Lighting Control
is enabled then any alarm condition (except Fire
alarms) will cause the linked lighting to be switched
on for the set light-on duration.
Note: Spectra lighting signal to be sent each time a
Tamper or PA switch is triggered and each time a
detector on an enabled zone is triggered when the
panel is armed.
Spectra Manual - On/Auto switching:
Press to switch the linked Spectra lighting
ON.
Press to switch the linked Spectra lighting
OFF and back to automatic operation.
32
. The LED will start
ESC