Jamming Detection; Spectra Lighting Status; Spectra Lighting Time-On Period; Zone Operating Mode - Response SL3 Installation And Operating Manual

The zone 1 LED will illuminate to indicate the
current Zone Lockout status.
LED ON
LED OFF
To change the setting:
1
Press
The Zone Lockout status will switch to the
opposite state (enabled/disabled) each time the
button is pressed.
Press to save the new setting and exit to
ENTER
Program Mode, or
Press to exit without saving.
ESC

JAMMING DETECTION

This controls the systems anti-jamming detection
facility. It is recommended that the jamming
detection is not activated for at least the first 30
days to allow time for you to become familiar with
the operation of your systems first.
Default setting: OFF (disabled)
7
Press
The zone 1 LED will illuminate to indicate the
current Jamming Detector status.
LED ON
LED OFF
To change the setting:
1
Press
The jamming detection status will switch to the
opposite state (enabled/disabled) each time the
button is pressed.
Press to save the new setting and exit to
ENTER
Program Mode, or
Press to exit without saving.
ESC
Note: The jamming detection program setting
will only control the jamming detection feature in
the Control Panel. The jamming detection
function incorporated in the Siren operates
independently.
28
Zone Lockout enabled
Zone Lockout disabled
Jamming Detection enabled
Jamming Detection disabled

SPECTRA LIGHTING STATUS

8
Press
The current status of the Spectra Lighting control
features is indicated on the zone 1 LED as follow:
Spectra Lighting Control
Disabled (OFF)
Spectra Lighting Control
Enabled (ON)
To change the setting:
1
Press
The On/Off status will switch to the opposite
state on each button press.
Press to save the new setting and exit to
ENTER
Program Mode, or
Press to exit without saving.
ESC

SPECTRA LIGHTING TIME-ON PERIOD

9
Press
The current setting for the Spectra lighting time-on
period will be displayed on the zone LEDs as follow:
Time on Illuminated
period
0
1 minute
2 minutes
3 minutes
5 minutes
10 minutes
20 minutes
To change the setting:
Press the button corresponding to the required
alarm period, the corresponding zone LED will
illuminate as the setting is changed.
Press to save the new setting and exit, or
ENTER
Press to exit without saving.
ESC

ZONE OPERATING MODE

Each alarm zone provides only a standard intruder
monitoring with normal Arm and Part-Arm functions.
zone 1 LED OFF
zone 1 LED ON
Selection
LEDs Button
all off press
zone 1 press
zone 2 press
zone 3 press
zone 4 press
zone 5 press
zone 6 press
0
1
2
3
4
5
6