Communications Software; Sdt Connector; Putty - Tripp Lite B092-016 Owner's Manual

 Click Apply. As you apply your services selections, the screen will be updated with a
confirmation message:
Message
3.5

Communications Software

You need to configure the access protocols that the communications software on the Administrator and
User Computer will use when connecting to the Console Server (and when connecting to serial devices
and network hosts which are attached to the Console Server).
This section provides an overview of the communications software tools that can be used on the remote
computer. Tripp Lite recommends the SDT Connector software tool that is provided with the Console
Server, however, generic tools such as PuTTY and SSHTerm may also be used.

3.5.1 SDT Connector

We recommend using the SDT Connector communications software for all communications with Console
Servers. Each Console Server is supplied with an unlimited number of SDT Connector licenses to use with
that Console Server.
SDT Connector is a lightweight tool that enables Users and Administrators to securely access the Console
Server, and the various computers, network devices and appliances that may be serially or network-
connected to the Console Server.
SDT Connector can be installed on Windows 2000, XP, 2003, Vista and on most Linux, UNIX and Solaris
computers as detailed in Chapter 7.
3.5.2

PuTTY

Communications packages like PuTTY can be also used to connect to the Console Server command line
(and to connect to serially attached devices as covered in Chapter 4). PuTTY is a freeware
implementation of Telnet and SSH for Win32 and UNIX platforms. It runs as an executable application
without needing to be installed onto your system. PuTTY (the Telnet and SSH client itself) can be
downloaded at http://www.tucows.com/preview/195286.html
Changes to configuration succeeded.
28