Configuration Backup (B095-004/003 Only) - Tripp Lite B092-016 Owner's Manual

The Console Server can synchronize its system time with a remote time server using the Network Time
Protocol (NTP). Configuring with the NTP time server ensures that the Console Server clock will be
accurate soon after the Internet connection is established. Also, if NTP is not used, the system clock will
be reset randomly every time the Console Server is powered up. To set the system time using NTP:
 Select the Enable NTP checkbox on the Network Time Protocol page.
 Enter the IP address of the remote NTP Server and click Apply.
Specify your local time zone so the system clock can show local time (and not UTP):
 Set your appropriate region/locality in the Time Zone selection box and click Apply.

11.4 Configuration Backup (B095-004/003 only)

It is recommended that you back up the Console Server configuration whenever you make significant
changes (such as adding new Users or Managed Devices) or before performing a firmware upgrade.
Note
The configuration files can be backed up from the command line (refer Chapter 14). A new Back
Up menu feature was introduced with Revision 3.0.1 firmware so is only currently available on
B095-004-1E / B095-003-1E-M Console Servers.
To activate the Back Up feature:
 Select the System: Configuration Backup menu option or click the
You can save the backup file remotely on your PC and you can restore configurations from remote
locations:
 Click Save Backup in the Remote Configuration Backup menu.
 The config backup file (System Name_date_config.opg) will be downloaded to your PC and
saved in the location you nominate.
152
icon.