Configuring Nagios Distributed Monitoring; Enable Nagios On The Console Server - Tripp Lite B092-016 Owner's Manual

Console server management switch console server with poweralert console server
Hide thumbs Also See for B092-016:
Table of Contents

Advertisement

 Click Apply.
Now set the Console Server to send alerts to the Nagios server:
 Select Alerts from the Alerts & Logging menu and click Add Alert.
 In Description enter: Administrator connection.
 Check Nagios (NSCA).
 In Applicable Ports check the serial port that has the router console port attached. In Applicable
Hosts check the IP address/DNS name of the IIS server.
 Click Connection Alert.
 Click Apply.
Lastly, add a User for the client running SDT Connector:
 Select Users & Groups from the Serial & Network menu.
 Click Add User.
 In Username, enter: sdtnagiosuser, then enter and confirm a Password.
 In Accessible Hosts click the IP address/DNS name of the IIS server. In Accessible Ports click the
serial port that has the router console port attached.
 Click Apply.

10.3 Configuring Nagios Distributed Monitoring

To activate the Console Server's Nagios distributed monitoring:
Nagios integration must be enabled and a path established to the central/upstream Nagios server
If the Console Server is to periodically report on Nagios-monitored services, then the NSCA client
embedded in the Console Server must be configured: the NSCA program enables scheduled check-
ins with the remote Nagios server and is used to send passive check results across the network to
the remote server
If the Nagios server is to actively request status updates from the Console Server, then the NRPE
server embedded in the Console Server must be configured – the NRPE server is the Nagios
daemon for executing plug-ins on remote hosts
Each of the Serial Ports and each of the Hosts connected to the Console Server which are to be
monitored must have Nagios enabled and any specific Nagios checks configured
Lastly the central/upstream Nagios monitoring host must be configured

10.3.1 Enable Nagios on the Console Server

 Select System: Nagios on the Console Server Management Console and tick the Nagios service
Enabled.
138

Advertisement

Table of Contents
loading

This manual is also suitable for:

B095-004-1eB095-003-1e-mB096-016B096-048

Table of Contents