Modifying Snmp Configuration - Tripp Lite B092-016 Owner's Manual

Resources
There are many high-quality tutorials and HOWTOs available via the netfilter website; in
particular, peruse the tutorials listed on the netfilter HOWTO page. A list of useful web locations
has been compiled for your convenience below:
Netfilter Homepage
Netfilter/iptables Tutorials

15.5 Modifying SNMP Configuration

/etc/config/snmpd.conf
The net-snmpd is an extensible SNMP agent which
information from SNMP management software. Upon receiving a request, it processes the
request(s), collects the requested information and/or performs the requested operation(s) and
returns the information to the sender.
This includes built-in support for a wide range of MIB information modules, and can be
extended using dynamically loaded modules, external scripts and commands.
enabled, should run with a default configuration. Its behavior can be customized via the options
in /etc/config/snmpd.conf.
Changing standard system information such as system contact, name and location can be
achieved by editing /etc/config/snmpd.conf file and locating the following lines:
sysdescr
syscontact
sysname
syslocation
Simply change the values of sysdescr, syscontact, sysname and syslocation to the desired
settings and restart snmpd.
http://netfilter.org
http://netfilter.org/documentation/index.html#documentation-
tutorials
"tripplite"
root <root@localhost>(configure /etc/default/snmpd.conf)
Not defined (edit /etc/default/snmpd.conf)
Not defined (edit /etc/default/snmpd.conf)
responds to SNMP queries for management
192
Snmpd, when