Basic Nagios Plug-Ins; Additional Plug-Ins - Tripp Lite B092-016 Owner's Manual

use
check_command
}
define service {
service_description
host_name
use
check_command
active_checks_enabled 0
passive_checks_enabled
}
define servicedependency{
name
host_name
dependent_host_name
dependent_service_description SSH Port
service_description
execution_failure_criteria
}

10.4.2 Basic Nagios Plug-Ins

Plug-ins are compiled executables or scripts that can be scheduled to be run on the Console Server to
check the status of a connected host or service. This status is then communicated to the upstream
Nagios server which uses the results to monitor the current status of the distributed network. Each
Console Server is preconfigured with a selection of the checks that are part of the Nagios plug-ins
package:
check_tcp and check_udp are used to check open ports on network hosts.
check_ping is used to check network host availability.
check_nrpe is used to execute arbitrary plug-ins in other devices.
Each Console Server is also preconfigured with two checks that are specific to the Console Server:
check_serial_signals is used to monitor the handshaking lines on the serial ports.
check_port_log is used to monitor the data logged for a serial port.

10.4.3 Additional Plug-Ins

Additional Nagios plug-ins (listed below) are available for all the Tripp Lite Console Servers:
generic-service
check_conn_via_tripplite!tcp!22
host-port-tcp-22-server
; host-port-<protocol>-<port>-<host>
server
generic-service
check_conn_via_tripplite!tcp!22
1
tripplite_nrpe_daemon_dep
tripplite
server
NRPE Daemon
w,u,c
147