Managed Devices (B095-004/003 Only) - Tripp Lite B092-016 Owner's Manual

4.8

Managed Devices (B095-004/003 only)

Managed Devices presents a consolidated view of all the connections to a device that can be accessed
and monitored through the Console Server.
Note
The Managed Devices feature was introduced with Revision 3.0.1 firmware so is only currently
available on B095-004-1E / B095-003-1E-M Console Servers.
To view the connections to the devices:
 Select Serial&Network: Managed Devices.
This screen displays all the Managed Device with their Description/Notes and lists of all the configured
Connections i.e. Serial Port # (if serially connected) or USB (if USB connected); IP address (if network
connected); Power PDU/outlet details (if applicable) and any UPS connections.
Many Devices such as servers will commonly have more than one power connections (e.g. dual power
supplied) and more than one network connection (e.g. for BMC/service processor).
All users can view (but not edit) these Managed Device connections by selecting Manage: Devices. The
Administrator can edit and add/delete these Managed Devices and their connections.
To edit an existing device and add a new connection:
 Select Edit on the Serial&Network: Managed Devices and click Add Connection.
 Select the connection type for the new connection (Serial, Network Host, UPS or RPC) and then
select the specific connection from the presented list of configured unallocated
hosts/ports/outlets.
57