Event Logging Configuration; Remote Serial Port Log Storage; Alert Configuration - Tripp Lite B092-016 Owner's Manual

# /bin/config –-set=config.portaccess.total=2
Please note that this rule becomes live straight away.
14.6

Event Logging Configuration

14.6.1

Remote Serial Port Log Storage

To setup remote storage of serial port 5 log to a remote Windows share with the following
properties:
IP Address
Directory
Username
Password
Logging level
The following commands must be issued:
# /bin/config –-set=config.eventlog.server.type=cifs
# /bin/config –-set=config.eventlog.server.address=192.168.0.254
# /bin/config –-set=config.eventlog.server.path=/tripplite/logs
# /bin/config –-set=config.eventlog.server.username=cifs_user
# /bin/config –-set=config.eventlog.server.password=secret
# /bin/config –-set=config.ports.port5.loglevel=2
The following command will synchronize the live system with the new configuration:
# /bin/config –-run=eventlog
Note that supported remote storage server types are 'None', 'cifs', 'nfs' and 'syslog'.
Supported port logging levels are '0', '1' and '2'.
14.6.2

Alert Configuration

You can add an email alert to the system from the command line by following these
instructions:
Determine the total number of existing alerts (if you have no existing alerts) you can assume
this is 0.
192.168.0.254
C:\\tripplite\logs\
cifs_user
secret
2 (input/output logging as well as user
connections & disconnections)
178