Configuring Powered Computers To Monitor A Managed Ups - Tripp Lite B092-016 Owner's Manual

Console server management switch console server with poweralert console server
Hide thumbs Also See for B092-016:
Table of Contents

Advertisement

8.2.3

Configuring Powered Computers to Monitor a Managed UPS

Once you have added a Managed UPS, each server that is drawing power through the UPS should be
setup to monitor the UPS status as a Slave. This is done by installing the NUT package on each server,
and setting up upsmon to connect to the Console Server.
Refer to the NUT documentation for details on how this is done, specifically sections 13.5 to 13.10.
http://eu1.networkupstools.org/doc/2.2.0/INSTALL.html
An example upsmon.conf entry might look like:
MONITOR managedups@192.168.0.1 1 username password Slave
- managedups is the UPS Name of the Managed UPS
- 192.168.0.1 is the IP address of the Console Server
- 1 indicates the server has a single power supply attached to this UPS
- username is the Username of the Managed UPS
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

B095-004-1eB095-003-1e-mB096-016B096-048

Table of Contents