Btr Refresh; Initialize Nvm - Fuji Xerox DocuPrint CP215 Series User Manual

• BTR Refresh

Purpose:
Specify whether to execute counter measures for curling/separating discharge of the paper.
Values:
Off*
On
• Chart
Purpose:
To print various charts that can be used for diagnosing your printer.
Values:
Ghost
4Colors
Alignment
Drum Refresh

• Initialize NVM

Purpose:
To initialize NVM for system parameters. After executing this function and rebooting the printer, all the
menu parameters, except the parameters for the network, are reset to their factory default values.
See also:
• "Resetting to Factory Defaults" on page 170
• Non-GenuineToner
Purpose:
To use toner cartridges of another manufacturer.
NOTE:
• Using non-genuine toner cartridges may make some printer features unusable, reduce print quality and
decrease the reliability of your printer. Fuji Xerox recommends only new Fuji Xerox brand toner cartridges for
your printer. Fuji Xerox does not provide warranty coverage for problems caused by using accessories, parts,
or components not supplied by Fuji Xerox.
• Before you use toner cartridges of another manufacturer, be sure to restart the printer.
Values:
Off*
On
164 Using the Operator Panel Menus
Does not automatically execute counter measures for
curling/separating discharge of the paper.
Automatically executes counter measures for curling/separating
discharge of the paper.
Prints a chart to check for ghost printing.
Prints bands of yellow, magenta, cyan, and black with varying density.
Prints a chart, and then check for proper alignment of the print image
on the paper.
Prints a chart to check the light fatigue of the drum cartridge.
Does not use toner cartridges of another manufacturer.
Uses toner cartridges of another manufacturer.