Fuji Xerox DocuPrint CP215 Series User Manual page 81

Windows Server 2008 and Windows Server 2008 64-bit Edition
NOTE:
• You must log in as an administrator.
1
Click Start Control Panel
→
2
Click Add a printer.
3
Click Add a network, wireless or Bluetooth printer.
4
Select a printer or click The printer that I want isn't listed.
If you have selected your printer, go to step 7.
If you have clicked The printer that I want isn't listed, go to step 5.
5
Select Add a printer using a TCP/IP address or host name, and then click Next.
6
Select TCP/IP Device from Device type, and enter the IP address in the Hostname or IP
address box, and then click Next.
If the User Account Control dialog box appears, click Continue.
NOTE:
• If you are an administrator on the computer, click Continue; otherwise, contact your administrator to
continue the desired action.
7
Click Have Disk to display the Install From Disk dialog box.
8
Click Browse, and then select the extracted setup information (.inf) file in
File" on page 75.
9
Click Open.
10
Click OK.
11
Select your printer name and click Next.
12
To change the printer name, enter the printer name in the Printer name box.
To use this printer as the default printer, select the Set as the default printer check box.
13
Click Next.
Installation starts.
14
If you do not want your printer shared, select Do not share this printer. Otherwise, select Share
this printer so that others on your network can find and use it.
15
Click Next.
16
Upon completion of the driver installation, click Print a test page to print a test page.
17
Click Finish.
Hardware and Sound
→
Printer Connection and Software Installation
Printers.
→
"Getting the Driver
81