Fuji Xerox DocuPrint CP215 Series User Manual page 35

10
LCD Panel
• Displays various settings, instructions, and error messages.
11
(WPS) Button (DocuPrint CP215 w Only)
• Starts Wi-Fi Protected Setup
12
(Wi-Fi) LED (DocuPrint CP215 w Only)
• Lights up when wireless connection is established, and blinks in certain conditions.
Status of Wi-Fi LED (DocuPrint CP215 w Only)
This section describes when the
See also:
• "Wireless Problems (DocuPrint CP215 w Only)" on page 203
(Wi-Fi) LED
Off
On
Blinking
normal
Blinking
slowly
®
(Push Button Configuration).
(Wi-Fi) LED lights up or blinks.
Printer Status
Wireless
LAN
*
settings
Connected to the network via
Ethernet cable; Regardless of the
Wireless LAN setting, wireless
connection is not available when an
Ethernet cable is connected to the
printer.
—
Disable
The printer enters the Power Saver
Enable
Mode
Wireless link established
Enable
Searching for wireless LAN access
Enable
point or router
Wrong WEP key entered during the
wireless setup
Wrong WPA key entered during the
wireless setup
Searching/Connecting with WPS
Enable
access point or router during
wireless operation
Error Message
—
—
—
—
—
WEP Key Input Error
WPA Key Input Error
—
Basic Operation 35