Table of Contents
Advertisement
Manual
Enter (SSID)
Setup
Infrastructure
Ad-hoc
NOTE:
•
This item is displayed when the Ethernet cable is disconnected and Wireless LAN is set to Enable.
Specify a name to identify the wireless network. Up to 32
alphanumeric characters can be entered.
Select to configure the wireless settings through the access point
such as a wireless router.
Select to configure the wireless settings with no
No Security
encryption settings.
Select to configure the wireless settings with the
Mixed Mode
Mixed Mode PSK encryption. Mixed Mode PSK
PSK
automatically selects the encryption type from
either WPA-PSK-TKIP, WPA-PSK-AES, or WPA2-
PSK-AES.
PassPhrase
Entry
Select to configure the wireless settings with the
WEP
WEP encryption.
WEP Key
Transmit
Key
Select to configure the wireless settings with the
WPA-PSK-
WPA-PSK-TKIP encryption.
TKIP
PassPhrase
Entry
Select to configure the wireless settings with the
WPA2-PSK-
WPA2-PSK-AES encryption.
AES
PassPhrase
Entry
Select to configure the wireless settings without the access point such
as a wireless router.
Select to configure the wireless settings with no
No Security
encryption settings.
Select to configure the wireless settings with the
WEP
WEP encryption.
WEP Key
Transmit
Key
Using the Operator Panel Menus
Specify the pass phrase of
alphanumeric characters from 8 to
63.
Specify the WEP key to use through
the wireless network. For 64bit keys,
enter 10 hexadecimal characters. For
128bit keys, enter 26 hexadecimal
characters.
Select a transmit key from Auto,
WEP Key 1, WEP Key 2, WEP Key
3, and WEP Key 4.
Specify the pass phrase of
alphanumeric characters from 8 to
63.
Specify the pass phrase of
alphanumeric characters from 8 to
63.
Specify the WEP key to use through
the wireless network. For 64bit keys,
enter 10 hexadecimal characters. For
128bit keys, enter 26 hexadecimal
characters.
Select a transmit key from WEP
Key 1, WEP Key 2, WEP Key 3,
and WEP Key 4.
155
Hide quick links:
Advertisement
Table of Contents
