Reset Defaults; Host Access List - Fuji Xerox DocuPrint CP215 Series User Manual

• Protocol
Purpose:
To enable or disable each protocol. The change becomes effective after the printer is turned off and
then on.
Values:
LPR
Port 9100
WSD
SNMP
Email Alerts
InternetServices
Bonjour (mDNS)

• Host Access List

Purpose:
To block data received from certain IP addresses through the wired or wireless network. You can set
up to five IP addresses. The change becomes effective after the printer is turned off and then on.
Values:
No.n/Address
(n is 1-5.)
No.n/Mask
(n is 1-5.)
No.n/Mode
(n is 1-5.)
NOTE:
• This item is only available for LPR or Port 9100.

• Reset Defaults

Purpose:
To initialize network data stored in Non-Volatile Memory (NVM). After executing this function and
rebooting the printer, all network settings are reset to their default values.
Disables the Line Printer Daemon (LPR) port.
Disable
Enables the LPR port.
Enable*
Disables the Port 9100 port.
Disable
Enables the Port 9100 port.
Enable*
Disables the Web Services on Devices (WSD) port.
Disable
Enables the WSD port.
Enable*
Disables the Simple Network Management Protocol (SNMP)
Disable
UDP port.
Enables the SNMP UDP port.
Enable*
Disables the Email Alerts feature.
Disable
Enables the Email Alerts feature.
Enable*
Disables an access to the CentreWare Internet Services
Disable
embedded in the printer.
Enables an access to the CentreWare Internet Services
Enable*
embedded in the printer.
Disables the Bonjour (mDNS).
Disable
Enables the Bonjour (mDNS).
Enable*
Sets the IP address for Filter n.
Sets the address mask for Filter n.
Disables the feature for Filter n.
Off*
Accepts an access from the specified IP address.
Accept
Rejects an access from the specified IP address.
Reject
Using the Operator Panel Menus 157