Clean Developer; Toner Refresh; Btr Refresh - Fuji Xerox DocuPrint CM115 w User Manual

Enter Number

• Clean Developer

Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Values:
Yes
No*

• Toner Refresh

Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in a new toner
cartridge.
Values:
Yellow
Magenta
Cyan
Black

• BTR Refresh

Purpose:
To specify whether to execute counter measures for curling/separating discharge of the paper.
Values:
Off*
On
• Initialize NVM
Purpose:
To initialize NVM for system parameters or Address Book data for e-mail and server address. After executing this
function and rebooting the printer, the menu parameters or data, except the parameters for the network, are reset to
their factory default values.
LY, LM, LC 0, 0, 0*
-5 – +5
RY, RM, RC 0, 0, 0*
-5 – +5
Y, M, C 0, 0, 0*
-5 – +5
Stirs the toner in a new toner cartridge.
Does not stir the toner in a new toner cartridge.
Cleans the toner in the yellow toner cartridge.
Yes
Does not clean the toner in the yellow toner cartridge.
No*
Cleans the toner in the magenta toner cartridge.
Yes
Does not clean the toner in the magenta toner cartridge.
No*
Cleans the toner in the cyan toner cartridge.
Yes
Does not clean the toner in the cyan toner cartridge.
No*
Cleans the toner in the black toner cartridge.
Yes
Does not clean the toner in the black toner cartridge.
No*
Does not automatically execute counter measures for curling/separating
discharge of the paper.
Automatically executes counter measures for curling/separating discharge of the
paper.
Sets lateral (perpendicular to paper feed direction) and
process (paper feed direction) color adjustment values
individually for yellow, magenta, and cyan. Enter a number in
order of color adjustment values individually for yellow,
magenta, and cyan.
Enter a number in order of lateral adjustment (left), lateral
adjustment (right), and process adjustment.
Using the Operator Panel Menus and Keypad 175