Understanding Printer Messages - Fuji Xerox DocuPrint CP215 Series User Manual

Understanding Printer Messages

The printer LCD panel displays messages describing the current state of the printer and indicates
possible printer problems you must resolve. This section describes messages, their meanings, and
how to clear the messages.
IMPORTANT:
• When an error code is displayed, the print data remaining on the printer and the information accumulated in
the memory of the printer are not secured.
Error-Code
010-397
016-500
016-501
016-502
016-602
016-610
016-612
016-718
016-720
016-737
016-741
016-742
016-743
016-744
016-745
016-746
016-799
016-920
016-921
016-922
016-923
016-924
What You Can Do
Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorized dealer.
See also:
• "Online Services" on page 239
This is not an error. You can continue the operation normally.
Turn off the printer, and then on. If this does not solve the problem, contact the Fuji
Xerox local representative office or an authorized dealer.
See also:
• "Online Services" on page 239
Press the button to cancel the current print job.
See also:
• "Canceling a Print Job" on page 135
Press the button. Enable S/W Download and execute the operation again
according to the operation procedure.
See also:
• "S/W Download" on page 160
Press the button to cancel the current print job.
See also:
• "Canceling a Print Job" on page 135
Press the button. Execute the operation again according to the operation procedure.
Press the button. Set only wireless LAN access point (Registrar) to be operated with
WPS-PBC, and execute the operation again according to the operation procedure.
Press the button. Check the passphrase for the wireless LAN access point
(Registrar) or router and execute the operation again according to the operation
procedure.
Press the button. Check if the security setting of the wireless LAN access point
(Registrar) or router is WPA or WPA2 (WEP is not supported on WPS), and execute the
operation again according to the operation procedure.
Troubleshooting 205