Clean Developer; Adjust Colorregi; Toner Refresh - Fuji Xerox DocuPrint CM215 series User Manual

• Adjust ColorRegi

Purpose:
To automatically adjust color registration.
Color registration adjustment need to be made during the initial setup of the printer or when the printer
is moved to a different location.
NOTE:
• The Adjust ColorRegi feature can be configured when Auto Regi Adjust is set to Off.
Values:
Auto Adjust

• Clean Developer

Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Values:
Yes
No*

• Toner Refresh

Purpose:
To use up a toner cartridge when you need to replace it before the end of its life, or to stir the toner in
a new toner cartridge.
Values:
Yellow
Magenta
Cyan
Black
• BTR Refresh
Purpose:
Specify whether to execute counter measures for curling/separating discharge of the paper.
Values:
Off*
On
Automatically corrects color registration.
Yes
Does not correct color registration automatically.
No*
Stirs the toner in a new toner cartridge.
Does not stir the toner in a new toner cartridge.
Cleans the toner in the yellow toner cartridge.
Yes
Does not clean the toner in the yellow toner cartridge.
No*
Cleans the toner in the magenta toner cartridge.
Yes
Does not clean the toner in the magenta toner cartridge.
No*
Cleans the toner in the cyan toner cartridge.
Yes
Does not clean the toner in the cyan toner cartridge.
No*
Cleans the toner in the black toner cartridge.
Yes
Does not clean the toner in the black toner cartridge.
No*
Does not automatically execute counter measures for
curling/separating discharge of the paper.
Automatically executes counter measures for curling/separating
discharge of the paper.
Using the Operator Panel Menus and Keypad 297