Removing A Memory Module; Figure 3-25: Removing A Dimm - HP Proliant ML310 Setup And Installation Manual

Hardware Options Installation

Removing a Memory Module

To remove a DIMM:
1. Follow the steps in "Removing the Access Panel" in this chapter.
2. Press outward on both latches of the DIMM socket at the same time (1). This
releases the DIMM and pushes it partially out of the socket.
3. Lift the DIMM from the socket (2).

Figure 3-25: Removing a DIMM

3-28
1
2
HP ProLiant ML310 Server Setup and Installation Guide
1