Battery - HP Proliant ML310 Setup And Installation Manual

Hardware Options Installation

Battery

The server has nonvolatile memory, which requires one battery, located on the
system board, to retain server information.
IMPORTANT: Refer to Appendix A, "Regulatory Compliance Notices," for battery disposal
information.
WARNING: The system board contains a lithium battery. There is a risk of fire
and chemical burn if the battery is handled improperly. Do not disassemble,
crush, puncture, short external contacts, dispose of in water or fire, or expose
the battery to temperatures higher than 60°C (140°F).
CAUTION: To prevent damage to equipment or loss of information, be sure that the
server is powered down, all cables are disconnected from the back of the server, and
the power cord is disconnected from the grounded (earthed) AC outlet before
removing the access panel.
CAUTION: Electrostatic discharge (ESD) can damage electronic components. Be
sure that you are properly grounded (earthed) before beginning any installation
procedure. Refer to Appendix B, "Electrostatic Discharge," for more information.
3-36 HP ProLiant ML310 Server Setup and Installation Guide