Removing A Hard Drive From A Hard Drive Bay; Figure 3-5: Disconnecting The Hard Drive Cables (Scsi Model) - HP Proliant ML310 Setup And Installation Manual

Hardware Options Installation

Removing a Hard Drive From a Hard Drive Bay

To remove a 3.5-inch hard drive:
1. Follow the steps in "Removing the Access Panel" in this chapter.
2. Disconnect the power and data cables from the back of all devices in the
hard drive compartment.
Figure 3-5 illustrates cable removal from SCSI hard drives.
Figure 3-5: Disconnecting the hard drive cables (SCSI
model)
3-8 HP ProLiant ML310 Server Setup and Installation Guide