Cabling A Two-Bay Hot-Plug Scsi Drive Cage; Figure 4-6: Connecting The Scsi Cable To The Smart Array Controller - HP Proliant ML310 Setup And Installation Manual

Cabling Guidelines
Connect the SCSI cable to the Smart Array Controller.
Figure 4-6: Connecting the SCSI cable to the
Smart Array Controller

Cabling a Two-Bay Hot-Plug SCSI Drive Cage

To cable the two-bay hot-plug SCSI drive cage:
1. Install the drive cage. Refer to "Installing the Two-Bay Hot-Plug SCSI Drive
Cage Into a Removable Media Bay," in Chapter 3, for instructions.
2. Locate the point-to-point SCSI cable included in the drive cage option kit.
3. Connect one end of the SCSI cable to the drive cage.
4. Connect the other end of the SCSI cable to the controller intended for use with
the new drive cage.
4-8 HP ProLiant ML310 Server Setup and Installation Guide