HP Proliant ML310 Setup And Installation Manual page 101

Date and Time
The Date and Time option is used to set the server date and time.
Automatic Server Recovery
The Automatic Server Recovery menu configures the Automatic Server Recovery
(ASR) features and may include the following options:
·
ASR Status enables or disables ASR. When set to Disabled, no ASR features
function.
·
ASR Timeout sets a timeout limit for resetting a server that is not responding.
When the server has not responded in the selected amount of time, it
automatically resets.
·
Thermal Shutdown enables or disables the ability of the server to automatically
power down when it reaches a dangerous temperature.
Server Passwords
The Server Passwords menu configures the password environment of the server.
The available options are as follows:
·
Set Admin Password sets a password to control access to the administrative
features of the server. When this password is set, the administrative features of
the server cannot be accessed without the correct password being entered.
·
Set Power-On Password sets a password to control access to the server during
power up. When this password is set, the server cannot be powered up without
the correct password being entered.
·
Network Server Mode is a security feature that protects an unattended network
server while allowing it to run after a power interruption. When set to Disabled,
the server operates normally. When set to Enabled, the following actions occur:
— The local keyboard does not function unless the power-on password is
entered.
— When there is not a diskette in the diskette drive, the power-on password is
bypassed, allowing the server to start.
HP ProLiant ML310 Server Setup and Installation Guide
Server Configuration and Utilities
5-5