Figure 3-34: Removing The Battery From The Scsi System Board; Figure 3-35: Removing The Battery From The Ata System Board - HP Proliant ML310 Setup And Installation Manual

Hardware Options Installation
3. Press outward on the latch at the top of the battery holder to release the
battery (1). Lift the battery away from the holder (2).
Figure 3-34: Removing the battery from the SCSI
system board
Figure 3-35: Removing the battery from the ATA system
board
4. Slide the replacement battery into the proper position with the positive (+) side
out.
3-38
1
2
1
2
HP ProLiant ML310 Server Setup and Installation Guide