Display Mode - Standard Horizon HX600S User Manual

Available Values: ON / OFF
Default: ON
CH NAME SET
Function: Changes the channel name shown on the display.
1. Select the channel on which you wish to change the name before recalling this Menu
item.
2. Press the [MENU] key to enter the Menu Mode.
3. Press the [ ] or [ ] key to select this Menu item (CH NAME SET).
4. Press the [MENU] key to enable adjustment of this Menu item.
5. Press the [ ] or [ ] key to select the first character (letter, number, or symbol) in the
name you wish to change, then press the [MEM] key to move to the next character.
6. If you make a mistake, press the [H/L] key to move back, and then reselect the correct
letter, number, or symbol.
7. Repeat step 5 as many times as necessary to complete the name tag (up to 10
characters).
8. After completing your adjustment, press the [MENU] key to save the new setting.
9. Press the PTT key to exit to normal operation.

DISPLAY MODE

Function: Selects the information to be displayed on the LCD
Available Values: BARO*1 / GPS NAV info*2 / CH name / Time*2 / None
Default: CH name
*1 : Requires optional SU-1
*2 : Requires GPS receiver.
DISTRESS RING
Function: Selects how long the DSC Distress alarm will ring
Available Values: 3 min / 5 times / 10 times / 15 times
Default: 3 min
DW DISPLAY
Function: Selects the Dual Watch scanning display mode.
Available Values: Normal / Special
24/39
FCC ID: K6630193X20
IC ID: 511B-30193X20
Operating Manual
Vertex Standard Co., Ltd.