Steps For Configuring The Log Server - NEC Express5800/R320c-E4 Installation Manual

Hide thumbs Also See for Express5800/R320c-E4:
Table of Contents

Advertisement

Chapter 2 Installing the Bundled Software
3.

Steps for Configuring the Log Server

ESXi 5.0 or later version does not include a service console. Therefore, this model achieves the syslog reporting
by forwarding the logs generated by ESXi to the log server on which NEC ESMPRO Agent is installed.
To use ftSys Management Appliance as the log server, no additional steps are required after following the steps
in Chapter 1 (1.10 Installing Additional Packages
server) and Chapter 2 (Install NEC ESMPRO Agent) of this document, because the log server will be
automatically configured and forwarding the logs generated by the ESXi becomes available.
To install a separate log server, additional settings are required on the log server side. This appendix describes
example steps to configure a Linux server as the log server. Configuring the log server settings will be
completed by following the steps in (3.1 Setting Firewall for Log Server) through (3.4 Starting Transferring
Logs).
Before following the steps, make sure that the settings described in Chapter 1 are configured. Note that the
instructions are provided based on the assumption that NEC ESMPRO Agent has been installed on the
separate log server, and also the settings (editing snmpd.conf, opening ports, etc.) for NEC ESMPRO Agent
have already been configured. For these settings, refer to the manual of NEC ESMPRO Agent.
The case of using ftSys Management Appliance as Log Server.
The case of using ftSys Management Appliance as the Log Server.
(ftSys Management Appliance)
The case of using other Linux server as Log Server.
The case of using other Linux server as the Log Server.
ftSys Management Appliance
70
Express5800/R320c-E4, R320c-M4 Installation Guide (VMware)
syslog report
Log Server
VM
ESMPRO/
ServerAgent
OS
Forward ESXi logs
ft Server
Manegement PC
VM
VM
VM
OS
OS
OS
Forward ESXi logs
ESXi5
LAN
ft Server
When ftSys Management Appliance is set as the log
Management PC
VM
VM
OS
OS
ESXi5
syslog report
ESMPRO/ServerAgent
Linux OS
Log Server
3. Steps for Configuring the Log Server

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/r320c-m4

Table of Contents