8
Specifying the time zone
1
Press the [Utility] key in the control panel.
2
Press the [,] or [+] key until "ADMIN. MANAGEMENT" is selected, and
then press the [OK] key.
3
Type in the administrator access code, and then press the [OK] key.
–
The manufacturer's default setting is "000000".
–
If the code was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
8-62
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
ADMIN. MANAGEMENT
ADMIN. NO.:------
Network settings
IC-206