Changing The Document Scanning Density; When "Text/Photo" Or "Text" Was Selected - Konica Minolta IC-206 User Manual

10
10.4

Changing the document scanning density

From the DENSITY screen, the scanning density for the document can be
changed.

When "TEXT/PHOTO" or "TEXT" was selected

When "TEXT/PHOTO" or "TEXT" is selected, the density can be specified as
described below.
1
Press the [Scan] key.
The machine enters Scan mode, and the Scan mode screen appears.
2
Press the [Density] key. The DENSITY screen appears.
3
Press the [,] or [+] key until "AUTO" or "MANUAL" is selected, and
then press the [OK] key.
10-28
300x300dpi TIFF 100%
TEXT/PHOTO
SET DESTINATION
DENSITY(TEXT/PHOTO)
AUTO
MANUAL
Performing a scan to e-mail operation
IC-206