If The Memory Becomes Full While Scanning; Documents - Konica Minolta IC-206 User Manual

Performing a scan to e-mail operation
10.6

If the memory becomes full while scanning

documents

If the memory becomes nearly full while documents are being scanned, a
warning message appears. Select whether to continue the transmission or to
cancel it.
After a message appears warning that the memory is nearly full, the "MEM.
FULL/TX CANCEL" menu appears.
% Press the [,] or [+] key until "YES" or "NO" is selected, and then press
the [OK] key.
– If "YES" is selected and the [OK] key is pressed, the message
"ACCEPTED" appears, and then the Scan mode screen appears
again.
– If "NO" is selected and the [OK] key is pressed, the message
"*WAIT MEMORY SPACE*" appears, and transmission of the
scanned page begins. After the transmission is finished, the
scanning of the remaining pages begins automatically.
– If the memory became full while scanning a document from the
original glass, select "NO" when the warning message appears,
and then press the [OK] key to begin sending the scanned pages.
When the transmission is finished, the message "COMPLETE"
appears, and then the Scan mode screen appears again.
IC-206
MEM.FULL/TX CANCEL
YES
NO
300x300dpi TIFF 100%
TEXT/PHOTO
*WAIT MEMORY SPACE*
user@test.local
10
10-39