Table of Contents
Advertisement
Performing a scan to e-mail operation
4
Press the [OK] key.
All communication results are displayed.
–
The communication results appear starting with the most recent
jobs. Press the [,] key to display communication results for older
jobs.
–
The NTP server can be specified if network interface card NC-503
or image controller IC-206 has been installed on the machine.
–
The transmission results appear differently depending on whether
or not an NTP server has been specified.
–
If an NTP server was specified:The transmission number and
transmission date and time appear for data sent with the Scan to
E-Mail or Scan to FTP operation.
–
If an NTP server was not specified:Only the transmission number
appears for data sent with the Scan to E-Mail or Scan to FTP
operation, but the transmission date and time do not appear.
5
Press the [OK] key.
The Scan mode screen appears again.
IC-206
TX/RX RESULT
60(JAN.10 13:30)TX
user01 -OK
REPORT=START
10
10-53
- Quick Links:
- Scan to Server (Ftp)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
