Specifying The Domain Name - Konica Minolta IC-206 User Manual

8

Specifying the domain name

1
In the "LDAP SETTING" menu, press the [+] or [,] key until "DOMAIN
NAME" is selected, and then press the [OK] key.
2
Type in the domain name.
– The domain name can contain a maximum of 64 characters.
– For the domain name, consult with the network administrator.
– If the setting was incorrectly entered, press the [Clear/Stop] key to
erase it, and then type it in correctly.
3
Press the [OK] key.
After the message "ACCEPTED" appears, the "LDAP SETTING" menu
appears again.
8-58
LDAP SETTING
LDAP ACCOUNT
LDAP PASSWORD
DOMAIN NAME
DOMAIN NAME
Network settings
IC-206