Table of Contents
Advertisement
Network settings
8.7
USER SETTING
The settings for the NTP server and time zone are described below. The time
can be set accurately with the NTP server.
Note
The settings for the NTP server and time zone appear only when network
interface card NC-503 or image controller IC-206 is installed on the
machine while fax kit FK-506 is not installed.
Specifying the NTP server
By connecting this machine to an NTP server, time data can be accurately
maintained by retrieving it from the NTP server automatically. When an
e-mail or FTP transmission is sent, that data is used, and the transmission
time is added as the name of the scan data and recorded in the transmission
log.
1
Press the [Utility] key in the control panel.
2
Press the [,] or [+] key until "ADMIN. MANAGEMENT" is selected, and
then press the [OK] key.
IC-206
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
8
8-59
- Quick Links:
- Scan to Server (Ftp)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
