Specifying An Ip Address - Konica Minolta IC-206 User Manual

4
4.3

Specifying an IP address

The following procedure describes how to assign the IP address to the
machine from the control panel.
Note
The IP address setting should be specified according to instructions from
the network administrator.
The IP address setting is specified in Utility mode by the administrator.
1
Press the [Utility] key in the control panel.
2
Press the [,] or [+] key until "ADMIN. MANAGEMENT" is selected, and
then press the [OK] key.
4-12
UTILITY MODE
USER MANAGEMENT
ADMIN. MANAGEMENT
COPY SETTING 1
Network printing
IC-206