8
3
Type in the administrator access code, and then press the [OK] key.
–
The manufacturer's default setting is "000000".
–
If the code was incorrectly entered, press the [Clear/Stop] key to
erase the number, and then type it in correctly.
4
Press the [,] or [+] key until "USER SETTING" is selected, and then
press the [OK] key.
5
In the "USER SETTING" menu, press the [,] or [+] key until "NTP
SERVER ADDRESS" is selected, and then press the [OK] key.
8-60
ADMIN. MANAGEMENT
ADMIN. NO.:------
ADMIN. MANAGEMENT
LDAP SETTING
USER SETTING
RETURN
USER SETTING
NTP SERVER ADDRESS
TIME ZONE
RETURN
Network settings
IC-206