Specifying printer driver settings
Paper Source
%
Select the paper drawer loaded with the paper.
–
If "Auto" is selected, the paper drawer loaded with paper of the size
specified in the "Output Size" list is used.
–
The available settings differ depending on the options that are
installed.
–
Settings: Tray 1, Tray 2 through Tray 5 (options), Bypass
Note
If "Hagaki" or an envelope or non-standard size is selected in the
"Original Size" list, only "Tray 1" and "Bypass" are available.
Only "Tray 1" and "Bypass" are available when "Paper Type" is set to
"OHP", "Thick Paper" or "Envelope".
IC-206
Tray
Bypass tray
5
5-23