Installing Using Plug And Play On Windows 2000 - Konica Minolta IC-206 User Manual

3

Installing using Plug and Play on Windows 2000

Note
If the driver is installed using Plug and Play, first the TWAIN driver for
scanning is installed, and then installation of the printer driver begins. The
procedure described in this manual is for the installation of the TWAIN
driver, then the printer driver. For details on the TWAIN driver, refer to the
user manual for the TWAIN driver.
Follow the instructions that appear in the Found New Hardware Wizard to
complete the installation.
1
Check the contents of the Found New Hardware Wizard, and then click
the [Next] button.
2
Select "Search for a suitable driver for my device [recommended]" and
then click the [Next] button.
3
Select "Specify a location" and then click the [Next] button.
4
Specify the following folder on the CD-ROM as the location where the
driver is saved.
– Folder to be specified: \Driver\WIN2K_XP\English
– The folder can be selected after clicking the [Browse] button.
5
Click the [Next] button.
– When the Microsoft digital signature warning message appears,
click the [Yes] button.
The Completing Found New Hardware Wizard dialog box appears.
6
Click the [Finish] button.
This completes the installation of the TWAIN driver.
The Found New Hardware Wizard appears again, and the installation
of the printer driver begins.
7
Repeat steps 1 through 6 to install the printer driver.
3-12
Installing the printer driver
IC-206