Connecting The Ipp Printing Netware Server And This Machine - Konica Minolta IC-206 User Manual

4

Connecting the IPP printing NetWare server and this machine

Connecting the NetWare server and this machine
NetWare version
NetWare 4.x
NetWare 5.x / 6
Specifying the NetWare 4.x/5.x/6 print server mode settings
1
Log on with Administrator privileges.
2
Start up NWadmin.
3
Select the print server system or category container, and then select
"Print service quick setup" from the tool menu.
4
Type in the print server name, printer name, print queue name and
volume name, select "Other/Unknown" as the printer type, and then
save the specified settings.
– For queue user privileges, the printer notification option,
assignment of multiple queues, and passwords, refer to the
NetWare documentation, and specify settings as necessary.
5
Start up PageScope Web Connection, click the Network tab in
Administrator mode, select "NetWare Configuration", and then specify
the following settings for this machine.
– For details on using PageScope Web Connection, refer to "Using
PageScope Web Connection" on page 12-3.
6
From the NetWare Server console, load MONITOR.NLM.
7
Select the connection settings, and check that the PServer you created
is listed in the active connections section.
Parameter
NetWare Configuration
Frame Type
Print Server Name
NDS Context Name
Print Server Password
4-26
Protocol
IPX
IPX
TCP/IP
NDS
*
Enable NetWare (Select the check box to enable it.)
*
AutoDetect (Select the frame type according to the network en-
vironment.)
Print server name created in step 4
Name of the context that con-
nects to PServer
Specify only when setting from the NetWare Server.
Emulation
NDS / Bindery
NDS / Bindery
Bindery
Not necessary to specify
Network printing
Service mode
Pserver / Nprinter
Pserver / Nprinter
NDPS(lpr)
IC-206