Configure The Network Parameters - CyberData 010935B Operation Manual

2.1.2 Configure the Network Parameters

1. Click the Network Setup button to open the Network Setup page
2. On the Network Setup page, enter values for the parameters indicated in
Web Page Item
IP Addressing*
IP Address*
Subnet Mask
Default Gateway
DNS Server 1*
DNS Server 2*
Operations Guide
Figure 2-18. Network Setup Page
Table 2-5. Network Setup Parameters
Description
Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
go to Step 3.
Enter the Static IP address.
Enter the Subnet Mask address.
Enter the Default Gateway address.
Enter the DNS Server 1 address.
Enter the DNS Server 2 address.
Click this button to save your configuration settings. Changing a
parameter that has an asterisk next to it will cause a system reboot
when saved.
Link to the Intercom Setup page.
930242F
Installing the VoIP Intercom
Configure the Intercom Parameters
(Figure 2-18).
Table 2-5.
Table 2-5 . If you select DHCP,
CyberData Corporation
21